A simple and effective moisture proof methodjiu0 edited on2017-06-08 08:58:02 64 views
A simple and effective moisture proof method
During the rainy season, the whole room was wet,
Feel bad. Many people try to use waterproof paint and so on,
But the actual effect is not obvious,
Here's a simple and effective
And in a low-cost way -
A plastic film is arranged on the lower layer of the floor tile so as to effectively damp the moisture.
Plastic film, coarse sand and so on.
First, buy films.
Plastic film has strong endurance to acid and base,
The utility model has low cost and can be waterproof.
Taking into account the laying, can not be replaced,
Therefore, the thickness must be selected
Good quality film.
Two, leveling the ground.
Even if the ground is flat, it needs cleaning,
To prevent the sharp broken plastic film,
Influence moistureproof effect.
Three. Laying film.
Cut the film directly and place it on the ground,
Try to use as much as possible when cutting,
So as to avoid too much space between each.
Four, laying coarse sand.
The pore formed by coarse sand itself can store water,
And after saturation,
The water on the coarse sand layer is no longer low,
The following ones no longer penetrate upwards,
So as to achieve moisture effect.
At the same time, coarse sand also increases adhesion to mortar.
Five, laying tiles.
Fill the sand layer with cement mortar,
And the laying of tiles on the completion of simple
Effective moisture treatment.
published on：20170608 08:57:56 guangzhou
category： Home Moisture
New Post：How is the room dry?