Why doesn’t the dehumidifier come out of waterjiu0 edited on2017-06-03 01:31:48 124 views
Why doesn't the dehumidifier come out of water
In the use process, there are many users have encountered the same problem, dehumidifier is not out of water. What is the problem?
Dehumidifier not out of water generally has the following reasons:
I set the humidity cannot be set correctly.
Because the set humidity is too high, the set humidity is greater than the current humidity, so the machine will not start. This is not a machine failure, it is not the result of proper use of the manual.
2. because of the overload operation of the machine equipment, the temperature of the machine is too high to protect the machine itself high temperature.
This is not the problem of the machine itself, just press the high temperature protection button inside the machine.
3. the machine may not function properly because of the burning of the compressor.
This situation is more troublesome, the cost of maintenance is relatively high, need to replace the compressor. This situation can be determined according to the time used by the machine. if the machine is used for a long time to replace the equipment, because the cost of the compressor is more expensive, the machine has been used for a long time, many of the electronic components have been aging even repaired, will often issue the problem, it is better to replace the equipment.
4. due to the leakage of refrigerant, the surface cover of the dehumidifier can be opened to observe whether there are oily substances around the compressor.
If it is due to the leakage of refrigerant can be added refrigerant welding good leak place can be used normally.
These are some of the failures that often lead to dehumidification failure, and hope to help users solve some problems.
published on：20170603 01:31:48 guangzhou